Info: 'Formatting now may destroy open files in other environments.'
3:
Bounds: x1=70, y1=125, x2=300, y2=165
Type: -120
Info: 'Please reboot with MultiFinder turned off.'
4:
Bounds: x1=20, y1=20, x2=52, y2=52
Type: -96
Info: ' Ä'
DITL_150.txt
Items: (11 entries)
0:
Bounds: x1=55, y1=105, x2=165, y2=125
Type: 4
Info: 'Done'
1:
Bounds: x1=245, y1=105, x2=355, y2=125
Type: 4
Info: 'Cancel Test'
2:
Bounds: x1=55, y1=75, x2=355, y2=95
Type: -120
Info: '(This cartridge should be erased again)'
3:
Bounds: x1=97, y1=50, x2=195, y2=70
Type: -120
Info: 'Defects found:'
4:
Bounds: x1=225, y1=50, x2=320, y2=70
Type: 4
Info: '(Defect Count)'
5:
Bounds: x1=100, y1=30, x2=195, y2=50
Type: -120
Info: 'Blocks tested:'
6:
Bounds: x1=225, y1=30, x2=320, y2=50
Type: 4
Info: '(Block Count)'
7:
Bounds: x1=111, y1=10, x2=195, y2=30
Type: -120
Info: 'Total Blocks:'
8:
Bounds: x1=225, y1=10, x2=320, y2=30
Type: 4
Info: '(max)'
9:
Bounds: x1=20, y1=15, x2=52, y2=47
Type: -96
Info: ' Ä'
10:
Bounds: x1=20, y1=130, x2=395, y2=145
Type: -120
Info: '^0'
DITL_148.txt
Items: (5 entries)
0:
Bounds: x1=190, y1=180, x2=300, y2=200
Type: 4
Info: 'Cancel'
1:
Bounds: x1=70, y1=25, x2=300, y2=60
Type: -120
Info: 'That volume is now using someone else's driver software.'
2:
Bounds: x1=70, y1=70, x2=300, y2=110
Type: -120
Info: 'Please reboot your computer with that volume powered off.'
3:
Bounds: x1=70, y1=125, x2=300, y2=165
Type: -120
Info: 'Then apply power, run this program, and select 'erase'.'
4:
Bounds: x1=20, y1=20, x2=52, y2=52
Type: -96
Info: ' Ä'
DITL_147.txt
Items: (27 entries)
0:
Bounds: x1=20, y1=140, x2=170, y2=160
Type: 4
Info: 'Cancel'
1:
Bounds: x1=240, y1=140, x2=390, y2=160
Type: 4
Info: 'Accept Values'
2:
Bounds: x1=2016, y1=196, x2=2153, y2=216
Type: 6
Info: '512 byte sectors'
3:
Bounds: x1=2016, y1=216, x2=2153, y2=236
Type: 6
Info: '256 byte sectors'
4:
Bounds: x1=2189, y1=196, x2=2326, y2=216
Type: 6
Info: 'Spare by sector'
5:
Bounds: x1=2189, y1=216, x2=2326, y2=236
Type: 6
Info: 'Spare by track'
6:
Bounds: x1=2341, y1=196, x2=2399, y2=216
Type: 6
Info: 'MFM'
7:
Bounds: x1=2341, y1=216, x2=2399, y2=236
Type: 6
Info: 'RLL'
8:
Bounds: x1=2189, y1=196, x2=2326, y2=216
Type: 6
Info: 'Fixed'
9:
Bounds: x1=2189, y1=216, x2=2326, y2=236
Type: 6
Info: 'Cartridge'
10:
Bounds: x1=140, y1=66, x2=200, y2=82
Type: 16
Info: '3'
11:
Bounds: x1=140, y1=96, x2=200, y2=112
Type: 16
Info: '11016'
12:
Bounds: x1=305, y1=66, x2=365, y2=82
Type: 16
Info: '306'
13:
Bounds: x1=305, y1=96, x2=365, y2=112
Type: 16
Info: '2'
14:
Bounds: x1=2337, y1=156, x2=2397, y2=172
Type: 16
Info: '20'
15:
Bounds: x1=2140, y1=96, x2=2200, y2=112
Type: 16
Info: '0'
16:
Bounds: x1=2140, y1=126, x2=2200, y2=142
Type: 16
Info: '306'
17:
Bounds: x1=2232, y1=156, x2=2332, y2=176
Type: -120
Info: 'Step Rate (µs):'
18:
Bounds: x1=2024, y1=126, x2=2135, y2=146
Type: -120
Info: 'Write Pre-Comp:'
19:
Bounds: x1=255, y1=96, x2=300, y2=116
Type: -120
Info: 'Heads:'
20:
Bounds: x1=2041, y1=96, x2=2135, y2=116
Type: -120
Info: 'Park Cylinder:'
21:
Bounds: x1=233, y1=66, x2=300, y2=86
Type: -120
Info: 'Cylinders:'
22:
Bounds: x1=59, y1=66, x2=135, y2=86
Type: -120
Info: 'Interleave:'
23:
Bounds: x1=29, y1=96, x2=135, y2=116
Type: -120
Info: 'Physical Blocks:'
24:
Bounds: x1=115, y1=40, x2=295, y2=56
Type: 4
Info: '(source of config)'
25:
Bounds: x1=69, y1=18, x2=341, y2=40
Type: 4
Info: '(main title)'
26:
Bounds: x1=20, y1=20, x2=52, y2=52
Type: -96
Info: ' Ä'
DITL_146.txt
Items: (6 entries)
0:
Bounds: x1=20, y1=60, x2=170, y2=80
Type: 4
Info: 'Edit Defects'
1:
Bounds: x1=210, y1=90, x2=360, y2=110
Type: 4
Info: 'Cancel'
2:
Bounds: x1=2020, y1=55, x2=2170, y2=75
Type: 4
Info: 'Edit Config'
3:
Bounds: x1=20, y1=90, x2=170, y2=110
Type: 4
Info: 'Examine Error Log'
4:
Bounds: x1=10, y1=10, x2=42, y2=42
Type: -96
Info: ' '
5:
Bounds: x1=75, y1=10, x2=360, y2=50
Type: -120
Info: 'Before you edit any values, please consult your manual.'
DITL_145.txt
Items: (11 entries)
0:
Bounds: x1=40, y1=135, x2=160, y2=155
Type: 4
Info: 'Do Test'
1:
Bounds: x1=260, y1=135, x2=380, y2=155
Type: 4
Info: 'Cancel'
2:
Bounds: x1=300, y1=95, x2=360, y2=115
Type: 16
Info: '1'
3:
Bounds: x1=180, y1=95, x2=295, y2=115
Type: -120
Info: 'Times to do test:'
4:
Bounds: x1=255, y1=45, x2=390, y2=65
Type: 6
Info: 'Sequential seeks'
5:
Bounds: x1=255, y1=65, x2=390, y2=85
Type: 6
Info: 'Random seeks'
6:
Bounds: x1=25, y1=45, x2=230, y2=65
Type: 6
Info: 'Read Only (saves data)'
7:
Bounds: x1=25, y1=65, x2=230, y2=85
Type: 6
Info: 'Write/Read (DESTROYS DATA)'
8:
Bounds: x1=25, y1=90, x2=125, y2=110
Type: 6
Info: 'Retries off'
9:
Bounds: x1=25, y1=110, x2=125, y2=130
Type: 6
Info: 'Retries on'
10:
Bounds: x1=135, y1=15, x2=265, y2=30
Type: -120
Info: 'Select Kind of Test:'
DITL_144.txt
Items: (3 entries)
0:
Bounds: x1=2100, y1=50, x2=2290, y2=70
Type: -124
Info: 'Turn off Macintosh power'
1:
Bounds: x1=10, y1=10, x2=42, y2=42
Type: -96
Info: ' '
2:
Bounds: x1=50, y1=10, x2=290, y2=45
Type: -120
Info: 'Heads are parked! Turn off power to your drive, then your Macintosh.'
DITL_143.txt
Items: (27 entries)
0:
Bounds: x1=20, y1=120, x2=170, y2=140
Type: 4
Info: 'Cancel'
1:
Bounds: x1=250, y1=120, x2=400, y2=140
Type: 4
Info: 'Accept Values'
2:
Bounds: x1=2016, y1=196, x2=2153, y2=216
Type: 6
Info: '512 byte sectors'
3:
Bounds: x1=2016, y1=216, x2=2153, y2=236
Type: 6
Info: '256 byte sectors'
4:
Bounds: x1=2189, y1=196, x2=2326, y2=216
Type: 6
Info: 'Spare by sector'
5:
Bounds: x1=2189, y1=216, x2=2326, y2=236
Type: 6
Info: 'Spare by track'
6:
Bounds: x1=2341, y1=196, x2=2399, y2=216
Type: 6
Info: 'MFM'
7:
Bounds: x1=2341, y1=216, x2=2399, y2=236
Type: 6
Info: 'RLL'
8:
Bounds: x1=2189, y1=196, x2=2326, y2=216
Type: 6
Info: 'Fixed'
9:
Bounds: x1=2189, y1=216, x2=2326, y2=236
Type: 6
Info: 'Cartridge'
10:
Bounds: x1=105, y1=70, x2=165, y2=86
Type: 16
Info: '3'
11:
Bounds: x1=337, y1=70, x2=397, y2=86
Type: 16
Info: '11016'
12:
Bounds: x1=2337, y1=96, x2=2397, y2=112
Type: 16
Info: '306'
13:
Bounds: x1=2337, y1=126, x2=2397, y2=142
Type: 16
Info: '2'
14:
Bounds: x1=2337, y1=156, x2=2397, y2=172
Type: 16
Info: '20'
15:
Bounds: x1=2140, y1=96, x2=2200, y2=112
Type: 16
Info: '0'
16:
Bounds: x1=2140, y1=126, x2=2200, y2=142
Type: 16
Info: '306'
17:
Bounds: x1=2232, y1=156, x2=2332, y2=176
Type: -120
Info: 'Step Rate (µs):'
18:
Bounds: x1=2024, y1=126, x2=2135, y2=146
Type: -120
Info: 'Write Pre-Comp:'
19:
Bounds: x1=2287, y1=126, x2=2332, y2=146
Type: -120
Info: 'Heads:'
20:
Bounds: x1=2041, y1=96, x2=2135, y2=116
Type: -120
Info: 'Park Cylinder:'
21:
Bounds: x1=2265, y1=96, x2=2332, y2=116
Type: -120
Info: 'Cylinders:'
22:
Bounds: x1=24, y1=70, x2=100, y2=90
Type: -120
Info: 'Interleave:'
23:
Bounds: x1=226, y1=70, x2=332, y2=90
Type: -120
Info: 'Physical Blocks:'
24:
Bounds: x1=115, y1=40, x2=295, y2=56
Type: 4
Info: '(source of config)'
25:
Bounds: x1=69, y1=18, x2=341, y2=40
Type: 4
Info: '(main title)'
26:
Bounds: x1=20, y1=20, x2=52, y2=52
Type: -96
Info: ' Ä'
DITL_142.txt
Items: (11 entries)
0:
Bounds: x1=55, y1=105, x2=165, y2=125
Type: 4
Info: 'Done'
1:
Bounds: x1=245, y1=105, x2=355, y2=125
Type: 4
Info: 'Cancel Test'
2:
Bounds: x1=55, y1=75, x2=355, y2=95
Type: -120
Info: '(Defects have been added to the defect list.)'
3:
Bounds: x1=97, y1=50, x2=195, y2=70
Type: -120
Info: 'Defects found:'
4:
Bounds: x1=225, y1=50, x2=320, y2=70
Type: 4
Info: '(Defect Count)'
5:
Bounds: x1=100, y1=30, x2=195, y2=50
Type: -120
Info: 'Blocks tested:'
6:
Bounds: x1=225, y1=30, x2=320, y2=50
Type: 4
Info: '(Block Count)'
7:
Bounds: x1=111, y1=10, x2=195, y2=30
Type: -120
Info: 'Total Blocks:'
8:
Bounds: x1=225, y1=10, x2=320, y2=30
Type: 4
Info: '(max)'
9:
Bounds: x1=20, y1=15, x2=52, y2=47
Type: -96
Info: ' Ä'
10:
Bounds: x1=20, y1=130, x2=395, y2=145
Type: -120
Info: '^0'
DITL_141.txt
Items: (2 entries)
0:
Bounds: x1=50, y1=18, x2=330, y2=36
Type: -120
Info: 'Please wait while we scan the SCSI bus.'
1:
Bounds: x1=10, y1=10, x2=42, y2=42
Type: -96
Info: ' Ä'
DITL_140.txt
Items: (9 entries)
0:
Bounds: x1=225, y1=240, x2=350, y2=260
Type: 4
Info: 'Done'
1:
Bounds: x1=225, y1=175, x2=350, y2=195
Type: 4
Info: 'Clear Log on Disk'
2:
Bounds: x1=225, y1=145, x2=350, y2=165
Type: 4
Info: 'Verify Log'
3:
Bounds: x1=225, y1=95, x2=350, y2=135
Type: 4
Info: 'Add Log toDefect List'
4:
Bounds: x1=174, y1=114, x2=190, y2=260
Type: 4
Info: '(Scroll Bar)'
5:
Bounds: x1=10, y1=114, x2=175, y2=260
Type: 4
Info: '(Defect List)'
6:
Bounds: x1=10, y1=95, x2=190, y2=113
Type: 4
Info: '(List Title)'
7:
Bounds: x1=20, y1=20, x2=52, y2=52
Type: -96
Info: ' Ä'
8:
Bounds: x1=60, y1=30, x2=300, y2=55
Type: 4
Info: '(Main Title)'
DITL_139.txt
Items: (3 entries)
0:
Bounds: x1=300, y1=50, x2=360, y2=70
Type: 4
Info: 'Ok'
1:
Bounds: x1=10, y1=10, x2=42, y2=42
Type: -96
Info: ' '
2:
Bounds: x1=50, y1=10, x2=360, y2=45
Type: -120
Info: 'The highlighted value is out of the expected range.'
DITL_138.txt
Items: (6 entries)
0:
Bounds: x1=20, y1=90, x2=170, y2=110
Type: 4
Info: 'Edit Defects'
1:
Bounds: x1=210, y1=90, x2=360, y2=110
Type: 4
Info: 'Cancel'
2:
Bounds: x1=20, y1=55, x2=170, y2=75
Type: 4
Info: 'Edit Config'
3:
Bounds: x1=210, y1=55, x2=360, y2=75
Type: 4
Info: 'Examine Error Log'
4:
Bounds: x1=10, y1=10, x2=42, y2=42
Type: -96
Info: ' '
5:
Bounds: x1=75, y1=10, x2=360, y2=50
Type: -120
Info: 'Before you edit any values, please consult your manual.'
DITL_137.txt
Items: (27 entries)
0:
Bounds: x1=15, y1=251, x2=165, y2=271
Type: 4
Info: 'Cancel'
1:
Bounds: x1=245, y1=251, x2=395, y2=271
Type: 4
Info: 'Accept Values'
2:
Bounds: x1=2016, y1=196, x2=2153, y2=216
Type: 6
Info: '512 byte sectors'
3:
Bounds: x1=2016, y1=216, x2=2153, y2=236
Type: 6
Info: '256 byte sectors'
4:
Bounds: x1=2189, y1=196, x2=2326, y2=216
Type: 6
Info: 'Spare by sector'
5:
Bounds: x1=2189, y1=216, x2=2326, y2=236
Type: 6
Info: 'Spare by track'
6:
Bounds: x1=255, y1=196, x2=310, y2=216
Type: 6
Info: 'MFM'
7:
Bounds: x1=255, y1=216, x2=310, y2=236
Type: 6
Info: 'RLL'
8:
Bounds: x1=20, y1=196, x2=160, y2=216
Type: 6
Info: 'Fixed'
9:
Bounds: x1=20, y1=216, x2=160, y2=236
Type: 6
Info: 'Cartridge'
10:
Bounds: x1=140, y1=66, x2=200, y2=82
Type: 16
Info: '3'
11:
Bounds: x1=337, y1=66, x2=397, y2=82
Type: 16
Info: '11016'
12:
Bounds: x1=337, y1=96, x2=397, y2=112
Type: 16
Info: '306'
13:
Bounds: x1=337, y1=126, x2=397, y2=142
Type: 16
Info: '2'
14:
Bounds: x1=337, y1=156, x2=397, y2=172
Type: 16
Info: '20'
15:
Bounds: x1=140, y1=96, x2=200, y2=112
Type: 16
Info: '0'
16:
Bounds: x1=140, y1=126, x2=200, y2=142
Type: 16
Info: '306'
17:
Bounds: x1=232, y1=156, x2=332, y2=176
Type: -120
Info: 'Step Rate (µs):'
18:
Bounds: x1=24, y1=126, x2=135, y2=146
Type: -120
Info: 'Write Pre-Comp:'
19:
Bounds: x1=287, y1=126, x2=332, y2=146
Type: -120
Info: 'Heads:'
20:
Bounds: x1=41, y1=96, x2=135, y2=116
Type: -120
Info: 'Park Cylinder:'
21:
Bounds: x1=265, y1=96, x2=332, y2=116
Type: -120
Info: 'Cylinders:'
22:
Bounds: x1=59, y1=66, x2=135, y2=86
Type: -120
Info: 'Interleave:'
23:
Bounds: x1=226, y1=66, x2=332, y2=86
Type: -120
Info: 'Physical Blocks:'
24:
Bounds: x1=115, y1=40, x2=295, y2=56
Type: 4
Info: '(source of config)'
25:
Bounds: x1=69, y1=18, x2=341, y2=40
Type: 4
Info: '(main title)'
26:
Bounds: x1=20, y1=20, x2=52, y2=52
Type: -96
Info: ' Ä'
DITL_136.txt
Items: (5 entries)
0:
Bounds: x1=225, y1=55, x2=290, y2=75
Type: 4
Info: 'OK'
1:
Bounds: x1=10, y1=55, x2=75, y2=75
Type: 4
Info: 'Cancel'
2:
Bounds: x1=54, y1=30, x2=286, y2=46
Type: 16
Info: 'Please enter the defect:'
3:
Bounds: x1=50, y1=10, x2=290, y2=26
Type: -120
Info: '^0'
4:
Bounds: x1=10, y1=10, x2=42, y2=42
Type: -96
Info: ' Ä'
DITL_135.txt
Items: (7 entries)
0:
Bounds: x1=335, y1=26, x2=400, y2=46
Type: 4
Info: 'Done'
1:
Bounds: x1=166, y1=26, x2=254, y2=46
Type: -120
Info: 'HELP SCREEN'
2:
Bounds: x1=20, y1=70, x2=400, y2=110
Type: -120
Info: 'Install - Connects the drive to the operating system without changing the data on the drive.'
3:
Bounds: x1=20, y1=120, x2=400, y2=180
Type: -120
Info: 'Edit - Allows review and change of media defects of drive. (Media defects are points on the drive, identified by the manufacturer, that will not hold data).'
4:
Bounds: x1=20, y1=190, x2=400, y2=210
Type: -120
Info: 'Test - Checks each data block for proper format.'
5:
Bounds: x1=20, y1=220, x2=400, y2=260
Type: -120
Info: 'Erase - Formats and initializes the drive for use with Macintosh. All data on the drive is lost.'
6:
Bounds: x1=20, y1=20, x2=52, y2=52
Type: -96
Info: ' Ä'
DITL_134.txt
Items: (10 entries)
0:
Bounds: x1=225, y1=240, x2=350, y2=260
Type: 4
Info: 'Done'
1:
Bounds: x1=225, y1=175, x2=350, y2=195
Type: 4
Info: 'Clear all Defects'
2:
Bounds: x1=225, y1=145, x2=350, y2=165
Type: 4
Info: 'Remove Defects'
3:
Bounds: x1=225, y1=95, x2=350, y2=135
Type: 4
Info: 'Add Defect'
4:
Bounds: x1=174, y1=114, x2=190, y2=260
Type: 4
Info: '(Scroll Bar)'
5:
Bounds: x1=10, y1=114, x2=175, y2=260
Type: 4
Info: '(Defect List)'
6:
Bounds: x1=10, y1=95, x2=175, y2=113
Type: 4
Info: '(List Title)'
7:
Bounds: x1=115, y1=55, x2=285, y2=75
Type: 4
Info: '(source of defects)'
8:
Bounds: x1=72, y1=30, x2=328, y2=55
Type: 4
Info: '(Main Title)'
9:
Bounds: x1=20, y1=20, x2=52, y2=52
Type: -96
Info: ' Ä'
DITL_133.txt
Items: (3 entries)
0:
Bounds: x1=20, y1=65, x2=400, y2=90
Type: -120
Info: '^1'
1:
Bounds: x1=80, y1=20, x2=370, y2=55
Type: -120
Info: '^0'
2:
Bounds: x1=20, y1=20, x2=52, y2=52
Type: -96
Info: ' Ä'
DITL_132.txt
Items: (4 entries)
0:
Bounds: x1=10, y1=80, x2=75, y2=100
Type: 4
Info: 'OK'
1:
Bounds: x1=225, y1=80, x2=290, y2=100
Type: 4
Info: 'Cancel'
2:
Bounds: x1=10, y1=10, x2=42, y2=42
Type: -96
Info: ' '
3:
Bounds: x1=50, y1=10, x2=290, y2=75
Type: -120
Info: '^0'
DITL_131.txt
Items: (4 entries)
0:
Bounds: x1=225, y1=100, x2=290, y2=120
Type: 4
Info: 'Cancel'
1:
Bounds: x1=10, y1=10, x2=42, y2=42
Type: -96
Info: ' '
2:
Bounds: x1=50, y1=10, x2=290, y2=90
Type: -120
Info: '^3'
3:
Bounds: x1=50, y1=100, x2=115, y2=120
Type: -120
Info: '^2'
DITL_130.txt
Items: (3 entries)
0:
Bounds: x1=225, y1=90, x2=290, y2=110
Type: 4
Info: 'Cancel'
1:
Bounds: x1=10, y1=10, x2=42, y2=42
Type: -96
Info: ' '
2:
Bounds: x1=50, y1=10, x2=290, y2=80
Type: -120
Info: 'This disk drive is in use, so it can't be installed or formatted. Please return to the Finder and reboot from a floppy diskette.'